Romeo Zero Adjustment Tool Size (2024)

FAQs

What size wrench to adjust romeo zero? ›

each time you remove the sight from the firearm, and after every 500 rounds fired. elevation adjustments. Use an inch-pound torque wrench set to 9 in-lbs for best results when mounting the ROMEOZero.

There are a total of 8 brightness levels on the ROMEOZero. The brightness adjustment button is located just behind the lens. To turn the sight on, use the tip of a finger to press and hold the brightness adjustment button for 2 seconds.

AUTO-OFF: This ROMEOZero-ELITE model is equipped with an auto-off feature, which helps extend battery life. After 2 hours of being ON, the optic will automatically turn off. To turn the optic back on, press and hold the brightness adjustment button for 2 seconds.

According to Sig, the little coin cell battery will power the Romeo Zero for 10 years.

Two sets of mounting screws are included with commercial versions of the ROMEOZero – M3 screws which are meant to mount the ROMEOZero to SIG P365 optics-ready slides, and M4 screws which are meant to mount the ROMEOZero to certain pistols that have slides cut for the Shield RMS-c footprint.

The ROMEOZero Micro Reflex Sight. At 1.6 inches long, 0.93 inches high and 0.93 inches wide, this is a streamlined little sight.

Excellent optic especially for the price. Got this for my Sig Sauer P365 and it fits perfectly. Easy to install and holds up well. It has helped my girlfriend with accuracy and as a side benefit makes it easier for her to rack the weapon.

The optic has a 'shake awake' feature that works great. It has never failed to be on when I've brought the gun up. Through all of my shooting, the Elite has held zero with no issues.

If the optic is turned off either manually or by MOTAC, it will come on at the last reticle option that was used. To change the reticle again, you must enter T.A.P. Reticle Mode. The ROMEOZero-ELITE utilizes MOTAC (Motion Activated Illumination System).

Made in the U.S., the ROMEOZero Elite is assembled at the SIG Sauer Electro-Optics facility in Wilsonville, Oregon. Learn more at sigsauer.com.

What footprint is the Romeo Zero Elite? ›

Both screws are adjusted using the provided Allen wrench. The Romeo Zero Elite uses the popular Shield RMSc/J-point footprint common to most subcompact optics-ready pistols.

The P365XL ROMEOZero Elite maintains the crisp, clean P365 trigger pull that compliments the inherent accuracy improvement of a red dot-equipped pistol.

After 2 minutes of inactivity (no movement), the sight will enter its power saving mode and automatically shut off. Any movement will immediately turn the sight back on, returning the sight to the last brightness setting used. The ROMEO1 has 5 illumination settings, 4 daytime and 1 NV.

The ROMEOZero-PRO brings the lightweight polymer design of our ROMEOZero line of micro reflex optics to a full-size pistol optic built with a host of premium features. The ROMEOZero-PRO model is compatible with all SIG SAUER ROMEO1 PRO optics-ready pistols.

Sig Sauer Romeo Zero features the Shield RMS/SMS mounting standard.

The ROMEOZero-PRO brings the lightweight polymer design of our ROMEOZero line of micro reflex optics to a full-size pistol optic built with a host of premium features. The ROMEOZero-PRO model is compatible with all SIG SAUER ROMEO1 PRO optics-ready pistols.

The ROMEOZero-PRO and ROMEROZero-R are covered by the SIG SAUER Electro-Optics Infinite Guarantee® / Limited Lifetime Warranty and Electronic Component Limited 5-Year Warranty.